WE ARE JUST ONE
PHONE CALL WAY
718 605-5500
CALL US NOW
Test Your Burglar Alarm System Once a Month
Testing the functionality of your device
1 Verify that the alarm system is in ‘’ READY” mode. Do not arm it!
2 Open each protected zone ( ie. door or window), one at a time.
3 Check that the keypad display’s the opened zone which you are testing (ie. door or window).
4 The keypad should display the name or number of the “ZONE OPEN”.
5 Repeat this procedure for each zone in the system (each zone should be tested).
Testing the signal transmission to monitoring center.
1 Call monitoring center at 1800 434-4000 and ask that your alarm system be placed in “TEST” mode.
Be ready to give your account monitoring number and password to the operator.
2 Arm your system as usual and set off by opening a door or window, or tripping a motion detector.
Allow the alarm to sound for at least one minute.
3 Turn off your system and reset it to “READY” mode.
4 Call the monitoring center and verify that the signal was received by the monitoring center and take
the alarm off test.
